Please download or view the manual here: 

Axis cleaning

We recommend cleaning the X-Axis behind the tool holder frequently.

Please follow the following steps:

1. Put the axis in loading position

2. Open the door

3. Switch off the power by removing the plug from the socket

4. Wait for 5 min to be sure the power is completely down

5. Locate the screws in the middle of the axis, see picture (red arrows)

6. Use a screwdriver TX10 to remove the screws

7. Carefully remove the plastic cover from the axis

8. Use a vacuum cleaner to remove all chips from the spindle and axis

9. Put the plastic cover back on the axis

10. Mount the screws using a screwdriver TX10

11. Switch on the machine by plugging in the plug into the socket

12. Close the door

13. Follow the steps as mentioned on the screen

X-Axis Maintenance